Difference between revisions of "IoTServer Help"

From Control Solutions IoTServer Documentation
Jump to navigation Jump to search
(Modbus)
Line 23: Line 23:
 
=== Modbus  ===
 
=== Modbus  ===
 
For Modbus, the BB4-8422 both Modbus RTU and Modbus TCP/IP are supported by this device.  Any of the communication ports can be used for Modbus communication.  The two serial ports can be individually configured as a Modbus RTU Master or Slave device.  The two ethernet ports can be configured as a Modbus TCP/IP client or server.  These ports are all independently configurable.  How each port is configured is controlled by the settings on the System / Task Configuration page.
 
For Modbus, the BB4-8422 both Modbus RTU and Modbus TCP/IP are supported by this device.  Any of the communication ports can be used for Modbus communication.  The two serial ports can be individually configured as a Modbus RTU Master or Slave device.  The two ethernet ports can be configured as a Modbus TCP/IP client or server.  These ports are all independently configurable.  How each port is configured is controlled by the settings on the System / Task Configuration page.
 +
 +
You have the ability to control how Modbus points are displayed ad referenced within this device.  This is controlled by a setting in the User SEtting page.  Here is the option for controlling this: [[File:User Modbus Register Format.png|frameless|Modbus point reference]]  Options are: None, Address, Number, and Modicon.
 +
 
==== [[Modbus RTU Slave]] ====
 
==== [[Modbus RTU Slave]] ====
 
==== [[Modbus RTU Master]] ====
 
==== [[Modbus RTU Master]] ====
 
==== [[Modbus TCP Server]] ====
 
==== [[Modbus TCP Server]] ====
 
==== [[Modbus TCP Client]] ====
 
==== [[Modbus TCP Client]] ====

Revision as of 19:08, 9 April 2019

IoTServer Introduction

Models Covered

This Wiki currently documents the Babel Buster BB4-8422 multi-protocol network gateway. The features it incorporates will become common to additional models in time.

Data Engine

Global Values

System

Task Status

Task Configuration

Network

Users

User List

User Settings

Logs

Protocols

SNMP

SNMP Agent

SNMP Client

SNMP Trap Receiver

Modbus

For Modbus, the BB4-8422 both Modbus RTU and Modbus TCP/IP are supported by this device. Any of the communication ports can be used for Modbus communication. The two serial ports can be individually configured as a Modbus RTU Master or Slave device. The two ethernet ports can be configured as a Modbus TCP/IP client or server. These ports are all independently configurable. How each port is configured is controlled by the settings on the System / Task Configuration page.

You have the ability to control how Modbus points are displayed ad referenced within this device. This is controlled by a setting in the User SEtting page. Here is the option for controlling this: Modbus point reference Options are: None, Address, Number, and Modicon.

Modbus RTU Slave

Modbus RTU Master

Modbus TCP Server

Modbus TCP Client