Difference between revisions of "IoTServer Help"

From Control Solutions IoTServer Documentation
Jump to navigation Jump to search
(Modbus)
Line 8: Line 8:
 
=== [[Task Configuration]] ===
 
=== [[Task Configuration]] ===
 
=== [[Network]] ===
 
=== [[Network]] ===
=== [[Users]] ===
+
=== Users ===
 +
==== [[User List]] ====
 +
==== [[User Settings]] ====
 
=== [[Logs]] ===
 
=== [[Logs]] ===
  

Revision as of 14:28, 7 April 2019

IoTServer Introduction

Models Covered

Data Engine

Global Values

System

Task Status

Task Configuration

Network

Users

User List

User Settings

Logs

Protocols

SNMP

SNMP Agent

SNMP Client

SNMP Trap Receiver

Modbus

For Modbus, the BB4-8422 both Modbus RTU and Modbus TCP/IP are supported by this device. Any of the communication ports can be used for Modbus communication. The two serial ports can be individually configured as a Modbus RTU Master or Slave device. The two ethernet ports can be configured as a Modbus TCP/IP client or server. These ports are all independently configurable. How each port is configured is controlled by the settings on the System / Task Configuration page.

Modbus RTU Slave

Modbus RTU Master

Modbus TCP Server

Modbus TCP Client