Difference between revisions of "Modbus RTU Slave Port Settings"
Jump to navigation
Jump to search
Jimhogenson (talk | contribs) (Created page with "File:Modbus RTU slave port settings.jpg") |
Jimhogenson (talk | contribs) |
||
Line 1: | Line 1: | ||
[[File:Modbus RTU slave port settings.jpg]] | [[File:Modbus RTU slave port settings.jpg]] | ||
+ | |||
+ | Select the baud rate, parity, and timeout for the Modbus RTU port. These settings are made individually for each Modbus RTU port. The timeout only applies when the RTU port is acting as Modbus master, and specifies how long the master will wait for a response from the slave before flagging the request with a "no response" error. |
Revision as of 16:50, 2 May 2019
Select the baud rate, parity, and timeout for the Modbus RTU port. These settings are made individually for each Modbus RTU port. The timeout only applies when the RTU port is acting as Modbus master, and specifies how long the master will wait for a response from the slave before flagging the request with a "no response" error.