Difference between revisions of "Modbus TCP Server Remap Table Edit"

From Control Solutions IoTServer Documentation
Jump to navigation Jump to search
Line 3: Line 3:
 
[[File:Modbus TCP server remap edit.jpg]]
 
[[File:Modbus TCP server remap edit.jpg]]
  
The "Map local" line will indicate "number", "address", or "Modicon register", depending on your preference which you set under User Settings.
+
'''Map local''' will indicate "number", "address", or "Modicon register", depending on your preference which you set under User Settings.
  
 
'''Register Number or Address''' – Enter the number (starting at 1) or raw address (starting at 0) as applicable. Do NOT enter 40001 for holding register 1 if you have not selected Modicon as the display format in your User Settings.  
 
'''Register Number or Address''' – Enter the number (starting at 1) or raw address (starting at 0) as applicable. Do NOT enter 40001 for holding register 1 if you have not selected Modicon as the display format in your User Settings.  

Revision as of 14:58, 2 May 2019

The edit page for server address map is very simple.

Modbus TCP server remap edit.jpg

Map local will indicate "number", "address", or "Modicon register", depending on your preference which you set under User Settings.

Register Number or Address – Enter the number (starting at 1) or raw address (starting at 0) as applicable. Do NOT enter 40001 for holding register 1 if you have not selected Modicon as the display format in your User Settings.

Modicon Register – Enter numbers like 40001 for the first holding register if you have selected Modicon representation in your User Settings.

RemoteAddr – The remote Modbus register address that this local address should be viewed as.


Modbus TCP server remap add header.jpg

Modbus server remap table empty.jpg


Let's assume you start with the empty table above. You click the Add Maps button. The add/edit page is very simple. Modbus server remap add.jpg


Modbus server remap table populated.jpg