Network

From Control Solutions IoTServer Documentation
Revision as of 03:38, 17 May 2019 by Jimhogenson (talk | contribs)
Jump to navigation Jump to search

Default Settings

When a device is initially booted, eth0 will default to a static IP address of 10.0.0.101. Eth1 will be set dynamically by your DHCP server on your network.

Interface Default IP
eth0 10.0.0.101
eth1 DHCP/Dynamic

Network Settings

Network settings page 1.jpg

Each device has two Ethernet ports called "eth0" and "eth1" on the device (eth0 illustrated above, both are available on the Networks page). The Ethernet ports support both ipv4 and ipV6. To change port settings, select Mode from the list. If static is selected, enter the IP address, netmask, and gateway. Then click Submit. Changes apply upon reboot of the IoTServer.