Network

From Control Solutions IoTServer Documentation
Revision as of 13:15, 16 April 2019 by Terrypearson (talk | contribs) (Default Settings)
Jump to navigation Jump to search

Network

Each device has two Ethernet ports. These are called "eth0" and "eth1" on the device.They support both ipv4 and ipV6. If an IP address is defined, the device will use those settings for the port. If you leave them blank, it will rely on DHCP.

Default Settings

Network Settings

When a device is initially booted, eth0 will default to a static IP address of 10.0.0.101. Eth1 will be set dynamically by your DHCP server on your network.

Interface Default IP
eth0 10.0.0.101
eth1 DHCP/Dynamic