Network
Revision as of 03:38, 17 May 2019 by Jimhogenson (talk | contribs)
Default Settings
When a device is initially booted, eth0 will default to a static IP address of 10.0.0.101. Eth1 will be set dynamically by your DHCP server on your network.
Interface | Default IP |
---|---|
eth0 | 10.0.0.101 |
eth1 | DHCP/Dynamic |
Network Settings
Each device has two Ethernet ports called "eth0" and "eth1" on the device (eth0 illustrated above, both are available on the Networks page). The Ethernet ports support both ipv4 and ipV6. To change port settings, select Mode from the list. If static is selected, enter the IP address, netmask, and gateway. Then click Submit. Changes apply upon reboot of the IoTServer.