Difference between revisions of "IoTServer Help"
Jump to navigation
Jump to search
Jimhogenson (talk | contribs) (→Data Engine) |
(→Modbus) |
||
| Line 17: | Line 17: | ||
==== [[SNMP Trap Receiver]] ==== | ==== [[SNMP Trap Receiver]] ==== | ||
=== Modbus === | === Modbus === | ||
| + | For Modbus, the BB4-8422 both Modbus RTU and Modbus TCP/IP are supported by this device. Any of the communication ports can be used for Modbus communication. The two serial ports can be individually configured as a Modbus RTU Master or Slave device. The two ethernet ports can be configured as a Modbus TCP/IP client or server. These ports are all independently configurable. How each port is configured is controlled by the settings on the System / Task Configuration page. | ||
==== [[Modbus RTU Slave]] ==== | ==== [[Modbus RTU Slave]] ==== | ||
==== [[Modbus RTU Master]] ==== | ==== [[Modbus RTU Master]] ==== | ||
==== [[Modbus TCP Server]] ==== | ==== [[Modbus TCP Server]] ==== | ||
==== [[Modbus TCP Client]] ==== | ==== [[Modbus TCP Client]] ==== | ||
Revision as of 14:14, 22 March 2019
IoTServer Introduction
Models Covered
Data Engine
Global Values
System
Task Status
Task Configuration
Network
Users
Logs
Protocols
SNMP
SNMP Agent
SNMP Client
SNMP Trap Receiver
Modbus
For Modbus, the BB4-8422 both Modbus RTU and Modbus TCP/IP are supported by this device. Any of the communication ports can be used for Modbus communication. The two serial ports can be individually configured as a Modbus RTU Master or Slave device. The two ethernet ports can be configured as a Modbus TCP/IP client or server. These ports are all independently configurable. How each port is configured is controlled by the settings on the System / Task Configuration page.
