Modbus RTU Slave Port Settings
Revision as of 13:22, 6 May 2019 by Jimhogenson (talk | contribs)
Select the baud rate and parity for the Modbus RTU slave port. These settings are made individually for each Modbus RTU port.
Provide a slave address for the Babel Buster 4. This is the address that other Modbus masters will use when communicating with this Babel Buster 4 operating as a Modbus slave.
When the RTU port is slave, additional information about its remapping parameters will be displayed. These can only be changed via the Task Configuration.