Modbus RTU Slave Port Settings

From Control Solutions IoTServer Documentation

Revision as of 19:32, 2 May 2019 by Jimhogenson (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Select the baud rate and parity for the Modbus RTU slave port. These settings are made individually for each Modbus RTU port.

When the RTU port is slave, additional information about its remapping parameters will be displayed. These can only be changed via the Task Configuration.

Retrieved from "https://wiki.csimn.com/index.php?title=Modbus_RTU_Slave_Port_Settings&oldid=1138"