Modbus RTU Slave Port Settings

From Control Solutions IoTServer Documentation
Revision as of 13:22, 6 May 2019 by Jimhogenson (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Modbus RTU slave port settings.jpg

Select the baud rate and parity for the Modbus RTU slave port. These settings are made individually for each Modbus RTU port.

Provide a slave address for the Babel Buster 4. This is the address that other Modbus masters will use when communicating with this Babel Buster 4 operating as a Modbus slave.

When the RTU port is slave, additional information about its remapping parameters will be displayed. These can only be changed via the Task Configuration.