Difference between revisions of "Modbus TCP Server Remap Table Edit"
Jimhogenson (talk | contribs) |
Jimhogenson (talk | contribs) |
||
Line 3: | Line 3: | ||
[[File:Modbus TCP server remap edit.jpg]] | [[File:Modbus TCP server remap edit.jpg]] | ||
− | ''' | + | The local number line will indicate "number", "address", or "Modicon register", depending on your preference which you set under User Settings. |
+ | |||
+ | '''Register Number or Address''' – Enter the number (starting at 1) or raw address (starting at 0) as applicable. Do NOT enter 40001 for holding register 1 if you have not selected Modicon as the display format in your User Settings. | ||
+ | |||
+ | '''Modicon Register''' – Enter numbers like 40001 for the first holding register if you have selected Modicon representation in your User Settings. | ||
'''RemoteAddr''' – The remote Modbus register address that this local address should be viewed as. | '''RemoteAddr''' – The remote Modbus register address that this local address should be viewed as. |
Revision as of 14:57, 2 May 2019
The edit page for server address map is very simple.
The local number line will indicate "number", "address", or "Modicon register", depending on your preference which you set under User Settings.
Register Number or Address – Enter the number (starting at 1) or raw address (starting at 0) as applicable. Do NOT enter 40001 for holding register 1 if you have not selected Modicon as the display format in your User Settings.
Modicon Register – Enter numbers like 40001 for the first holding register if you have selected Modicon representation in your User Settings.
RemoteAddr – The remote Modbus register address that this local address should be viewed as.
Let's assume you start with the empty table above. You click the Add Maps button. The add/edit page is very simple.