Difference between revisions of "Network"
Jump to navigation
Jump to search
Jimhogenson (talk | contribs) |
Jimhogenson (talk | contribs) |
||
Line 1: | Line 1: | ||
== Network == | == Network == | ||
− | [[File:Network settings page 1.jpg| | + | [[File:Network settings page 1.jpg|850px]] |
Each device has two Ethernet ports. These are called "eth0" and "eth1" on the device.They support both ipv4 and ipV6. If an IP address is defined, the device will use those settings for the port. If you leave them blank, it will rely on DHCP. | Each device has two Ethernet ports. These are called "eth0" and "eth1" on the device.They support both ipv4 and ipV6. If an IP address is defined, the device will use those settings for the port. If you leave them blank, it will rely on DHCP. |
Revision as of 15:52, 3 May 2019
Network
Each device has two Ethernet ports. These are called "eth0" and "eth1" on the device.They support both ipv4 and ipV6. If an IP address is defined, the device will use those settings for the port. If you leave them blank, it will rely on DHCP.
Default Settings
When a device is initially booted, eth0 will default to a static IP address of 10.0.0.101. Eth1 will be set dynamically by your DHCP server on your network.
Interface | Default IP |
---|---|
eth0 | 10.0.0.101 |
eth1 | DHCP/Dynamic |